A153/A153M-04
|
钢铁制金属构件上镀锌层(热浸)
|
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
|
A159-83(2001)
|
汽车用灰铁铸件
|
Standard Specification for Automotive Gray Iron Castings
|
A167-99
|
不锈钢和耐热铬镍钢板、薄板及带材
|
Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
|
A176-99
|
不锈钢和耐热铬钢板、薄板及带材
|
Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
|
A178/A178M-02
|
电阻焊接碳素钢钢管及碳锰钢锅炉和过热器管的技术规范
|
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
|
A179/A179M-90a(2001)
|
热交换器和冷凝器用无缝冷拉低碳钢管
|
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
|
A181/A181M-01
|
普通锻制碳素钢管的规格
|
Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
|
A182/A182M-02
|
高温设备用锻制或轧制的合金钢管法兰、锻制管件、阀门及零件
|
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
|
A183-03
|
钢轨用碳素钢螺栓和螺母
|
Standard Specification for Carbon Steel Track Bolts and Nuts
|
A184/A184M-01
|
混凝土加筋用变形钢筋编织网
|
Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement
|
A185-02
|
钢筋混凝土用焊接钢丝结构
|
Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
|
A192/A192M-02
|
高压用无缝碳素钢锅炉管
|
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
|
A193/A193M-04b
|
高温设备用合金钢和不锈钢螺栓材料
|
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service
|
A194/A194M-04a
|
高温和高压设备用碳素钢与合金钢螺栓和螺母的规格
|
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
|
A197/A197M-00
|
化铁炉用可锻铸铁
|
Standard Specification for Cupola Malleable Iron
|
A202/A202M-03
|
压力容器用铬锰硅合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon
|
A203/A203M-97(2003)
|
压力容器用镍合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
|
A204/A204M-03
|
压力容器用钼合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
|
A209/A209M-03
|
锅炉和过热器用无缝碳钼合金钢管
|
Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
|
A210/A210M-02
|
锅炉和过热器用无缝中碳素管
|
Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
|
A213/A213M-04
|
无缝铁素体和奥氏体合金钢锅炉、过热器和换热器管
|
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
|
A214/A214M-96(2001)
|
热交换器与冷凝器用电阻焊接碳素钢管
|
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
|
A216/A216M-93(2003)
|
高温下使用的适合于熔焊的碳素钢铸件规格
|
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High- Temperature Service
|
A217/A217M-02
|
适合高温受压零件用合金钢和马氏体不锈钢铸件
|
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
|
A220/A220M-99
|
珠光体可锻铁
|
Standard Specification for Pearlitic Malleable Iron
|
A225/A225M-03
|
压力容器用锰矾镍合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
|
A227/A227M-99
|
机械弹簧用冷拉钢丝
|
Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
|
A228/A228M-02
|
乐器用优质弹簧钢丝
|
Standard Specification for Steel Wire, Music Spring Quality
|
A229/A229M-99
|
机械弹簧用油回火的钢丝
|
Standard Specification for Steel Wire, Oil-Tempered for Mechanical Springs
|
A230/A230M-99
|
阀门用油回火优质碳素钢弹簧丝
|
Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
|
A231/A231M-96(2002)
|
铬钒合金钢弹簧丝
|
Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
|
A232/A232M-99
|
阀门用优质铬钒合金钢弹簧丝
|
Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
|
A234/A234M-04
|
中温与高温下使用的锻制碳素钢及合金钢管配件
|
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
|
A239-95(2004)
|
用普力斯试验法(硫酸铜浸蚀)确定铁或钢制品上镀锌层最薄点的测试方法
|
Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
|
A240/A240M-04ae1
|
压力容器用耐热铬及铬镍不锈钢板、薄板及带材
|
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
|
A242/A242M-04
|
高强度低合金结构钢
|
Standard Specification for High-Strength Low-Alloy Structural Steel
|
A247-67(1998)
|
铁铸件中石墨显微结构评定试验方法
|
Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
|
A249/A249M-04
|
锅炉、过热器、换热器和冷凝器用焊接奥氏体钢管
|
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
|
A250/A250M-04
|
锅炉和过热器用电阻焊铁素体合金钢管
|
Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
|
A252-98(2002)
|
焊接钢和无缝钢管桩
|
Standard Specification for Welded and Seamless Steel Pipe Piles
|
A254-97(2002)
|
铜焊钢管规格
|
Standard Specification for Copper-Brazed Steel Tubing
|
A255-02
|
测定钢淬透性用末端淬火试验的标准试验方法
|
Standard Test Method for Determining Hardenability of Steel
|
A262-03
|
奥氏体不锈钢晶间浸蚀敏感性的检测
|
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
|
A263-03
|
耐腐蚀铬钢包覆板材,薄板材及带材技术规范
|
Standard Specification for Stainless Chromium Steel-Clad Plate
|
A264-03
|
包覆的不锈铬镍钢板,薄板及带材规格
|
Specification for Stainless Chromium-Nickel Steel-Clad Plate
|
A265-03
|
镍和镍基合金包覆钢板规格
|
Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
|
A266/A266M-03a
|
压力容器部件用碳素钢锻件规格
|
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
|
A268/A268M-04
|
一般设备用无缝和焊接铁素体与马氏体不锈钢管
|
Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
|
A269-04
|
一般设备用无缝和焊接奥氏体不锈钢管
|
Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
|
A270-03a
|
卫生设施用无缝钢和焊接奥氏体不锈钢管
|
Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
|
A275/A275M-98(2003)
|
钢锻件的磁粉检查试验方法
|
Standard Test Method for Magnetic Particle Examination of Steel Forgings
|
A276-04
|
不锈钢棒材和型材
|
Standard Specification for Stainless Steel Bars and Shapes
|
A278/A278M-01
|
适用于650F容压部件用灰铸铁件的技术规范
|
Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
|
A283/A283M-03
|
低和中等抗拉强度碳素钢板
|
Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
|
A285/A285M-03
|
压力容器用低和中等抗拉强度的碳素钢板
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
|
A288-91(2003)
|
涡轮发电机磁性定位环用碳素钢和合金钢锻件
|
Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
|
A289/A289M-97(2003)
|
发电机非磁性定位环用合金钢锻件的技术规范
|
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
|
A290-02
|
减速器环用碳素钢和合金钢锻件
|
Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
|
A291-03
|
减速器小齿轮、齿轮和心轴用碳素钢和合金钢锻件
|
Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
|
A295-98
|
高碳耐磨轴承钢技术规范
|
Standard Specification for High-Carbon Anti-Friction Bearing Steel
|
A297/A297M-97(2003)
|
一般用耐热铬铁与镍铬铁合金钢铸件规格
|
Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
|
A299/A299M-04
|
压力容器用锰硅碳钢板
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
|
A302/A302M-03
|
压力容器用锰钼和锰钼镍合金钢板
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
|
A304-04
|
有末端淬火淬透性要求的合金钢棒材的技术规范
|
Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
|
A307-04
|
抗拉强度为60000psi的碳素钢螺栓和螺柱的技术规范
|
Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
|
A308/A308M-03
|
经热浸处理镀有铅锡合金的薄板材的技术规范
|
Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
|
A309-01
|
用三点试验法测定长镀锌薄钢板镀层的重量成分的试验方法
|
Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
|
A311/A311M-04
|
有机械性能要求的消除应力的冷拉碳素钢棒
|
Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
|
A312/A312M-04a
|
无缝和焊接奥氏体不锈钢管
|
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
|
A313/A313M-03
|
不锈钢弹簧丝技术规范
|
Standard Specification for Stainless Steel Spring Wire
|